TechniSat DIGITY 1 - Manual (Page 13)

type of LNB, then you must adjust the receiver as follows :
>
Press the Menu, key in order to display the Main menu.
> Use the arrow up/down keys to mark the line Settings.
> Confirm by pressing OK.
The menu
Settings will be displayed.
> Now mark the line LNB Settings by means of the arrow up/down keys.
> Confirm by pressing OK.
The menu
LNB Settings will be displayed.
The following adjustments can be made in this sub-menu:
5.4.1 Switch DiSEqC on or off
DiSEqC (
Digital Satellite Equipment Control) is a digital control signal used to control and
switch DiSEqC-compatible components via the antenna cable.
If your external unit is equipped with DiSEqC components, you must switch on the DiSEqC-
control:
13
bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 13