TechniSat DIGIT MF4-S - Manual (Page 15)

> To do this, use the arrow keys up/down to mark the field
All, if you wish to scan for both free-to-air and encrypted
programmes, or All free, if you wish to scan only for free-
to-air programmes.
> Confirm your selection by pressing OK, an automatic pro-
gramme scan will be started. All the satellites included in the
antenna configuration will be scanned for programmes. This
procedure may take several minutes. Please note any mes-
sages displayed on screen.
Terminating the installation assistant
> Confirm the final message (Fig. 5-14) of the installation assi-
stant by pressing OK, this will return you to normal opera-
tion.
6 Settings
You have now made all the necessary connections and commenced
operation of your new digital receiver. If necessary, you can now pro-
ceed to optimise the settings of the digital receiver according to your
preferences.
6.1 Operating language
This menu item gives you the opportunity to set the menu language
according to your personal preference.
To change the operating language, proceed as follows:
> Press the Menu key to call up the Main Menu. (Fig. 6-1)
> Use the arrow keys up/down to mark the menu line
Operating language.
> Confirm by pressing OK.
The sub-menu Operating language will be displayed.
> Use the arrow keys up/down to mark the desired langua-
ge.
> Store this selection in memory by pressing OK.
> Press the Back key to return to the Main Menu.
6.2 Basic settings
To ensure optimum enjoyment from your DVB receiver, you should
still make the necessary settings according to your personal prefe-
rences.
> Use the Menu key to display the Main Menu.
> Use the arrow keys up/down to mark the line Settings.
> Confirm by pressing OK. The sub-menu Settings will be
displayed (Fig. 6-2)
15
(Fig. 5-14)
(Fig. 5-13)
(Fig. 6-1)
(Fig. 6-2)