TechniSat DIGIT MF4-S - Manual (Page 32)

> Hold down the yellow function key to page forward continu-
ously. A clock is displayed to give you a better overview.
Press the green function key in the same way to page bak-
kward through the tables.
The individual days of the week are displayed along the bot-
tom of the screen. If information relating to the following days
is available, the appropriate fields will be marked.
> To obtain a preview for a specific day, either press the
numeric key corresponding to the day of the week.
or
Press the Back key to return to the table “Next”.
7.15.7 SFI functions
To execute the following SFI functions, call up the SFI as described
in Point 7.15.3.
7.15.7.1 SFI Information
Use the SFI Info to obtain brief information on the marked channel
or programme. If SFI information is available, this is indicated by a
next to the appropriate programme.
> Use either the arrow keys or the function keys to mark
the desired programme.
> Press the SFI key to display the inform ation.
You can scroll or page through lengthy information text using
the arrow keys.
> Press the Back key to return to the previous table.
7.15.7.2 SFI timer programming
The electronic programme guide SFI allows you to programme timer
events with particular ease.
> Use the arrow keys or the function keys to mark the
desired programme.
> Press the red function key Timer to open a selection win-
dow.
> Use the arrow keys up/down to mark the required
Timer type (see Point 7.16.1.2).
> Confirm by pressing OK. The menu Manage timer sho-
wing the data relating to the programme selected will be
displayed, so that you can check on the correctness. If requi-
red, you can make changes in this menu (see 7.16).
> Press the Back key to return to the previous table.
The relevant line is marked. Depending on the timer type in
use, the receiver will now be switched on at the commence-
ment of the selected programme. If the receiver was switched
32