Teac 1006.MA-1087A - Manual (Page 10)

18 19
Preset Tuning
How to select a preset station
To select FM or AM, press the TUNER
(FM/AM) button. 1
Press the PRESET button repeatedly
until the desired preset station is
found. 2
Select “TUNER” using the FUNCTION
button. 1
To select FM or AM, press the TUNER
(FM/AM) button again. 2
Select the station you want to listen
to (auto selection). 3
Hold down the Skip button (.or/)
for more than 2 seconds and release it
when the frequency display begins to
change.
When a station is tuned in, the tuning
process will stop automatically.
< To stop the auto selection, press the Skip
button.
Listening to the Radio
Selecting stations which cannot be
tuned automatically (manual selection)
When the Skip button (.or/) is
pressed momentarily the frequency
changes by a fixed step.
Press the Skip button repeatedly until the
station you want to listen to is found.
If the reception is poor
For the best reception, rotate the FM or
the AM antenna until you get stations
clearly.
3 1 2
You can program 10 FM & 10 AM channel
presets.
If the power supply is interrupted, the
settings kept in memory (clock, preset
stations, timer setting) will be erased.
Tune in a station you want to listen
to (see page 18).
Press the MEMORY button. 2
1
Within 5 seconds, press the MEMORY
button. 4
Within 5 seconds, select a preset
channel to store the station using the
PRESET button. 3
To store more stations, repeat steps to
. 4
1