Listening to ipod, Operating ipod 1 – Teac 1006.MA-1087A User Manual
Select “iPod” using the FUNCTION
button or the “iPod” button of the
remote control unit. If an iPod is already
docked, playback will start.
When no iPod is docked the iPod
indicator on the display blinks.
You can also use the Play/Pause button
(y/J) to select “iPod”.
Insert the iPod into the Dock of the SR-
Then push the Play/Pause button (y/J)
on the iPod or the SR-LXi. The SR-LXi
will automatically turn on and start
playback from the iPod’s music list.
Make sure to use an appropriate Dock
adapter (see “Getting Started” on page
If you remove the iPod during playback,
the SR-LXi automatically turns standby.
The battery of the iPod is recharged to
the full whenever the iPod is docked and
the SR-LXi is connected to the AC power
When headphones are plugged into the
iPod, sound comes from both the
speakers of the SR-LXi and the
Listening to iPod
To select iPod mode
To skip to the next or a previous
During playback, repeatedly press the
Skip button (. or/ ) until the
desired track is found. The selected track
will be played from the beginning.
When the . button is pressed during
playback, the track being played will be
played from the beginning. To return to
the beginning of the previous track, press
the . button twice.
Search for a part of a track
During playback, hold down the Skip
button (. or /) for more than 2
seconds and release it when the part you
want to listen to is found.
Operating iPod 1
To suspend playback temporarily
Press the Play/Pause button (G /J )
during playback. Playback stops at the
current position. To resume playback,
press the Play/Pause button (G/J) again.