TRENDnet TE100-MP1U - Manual (Page 12)

12
9. Click Apply to save your settings. And the server will reboot.
10. You have now finished the procedure of setting the wireless parameters.
#
In infrastructure mode, TEW-MP2U searches all channels to join the matched wireless
service set. In ad-hoc mode, TEW-MP2U searches all channels to join the matched wireless
ad-hoc service set too, however, if none are found, TEW-MP2U creates that service set in the
assigned channel.
#
In ad-hoc mode, WPA-PSK/TKIP is not allowed.
3.2.3 Set Wireless Configuration Using Server’s Web Pages
1. You can see the IP address of MFP Server in the server list. Open IE Browser and
type server’s IP address or click the Home Icon of MFP Server Control Center.