TRENDnet TE100-MP1U - Manual (Page 62)

62
before and after the scanning, respectively. We will introduce “auto-connect scanning”
in the following section.
7.3.4
NetUSB Scanning using Network Scan
For NetUSB scanning, we recommend you use Network Scan as the following steps.
A. In the Control Center, click the MFP Server that has the desired MFP attached.
B. Click the desired MFP.
C. Click the “Network Scanner” button. Then you can see that the Control Center will
automatically do a “connect” operation. The following window will appear.
D. Choose one of TWAIN or WIA item. Click “OK”. The following window will appear.