Toshiba Strata DK280 - Manual (Page 13)

Automatic Callback
(ACB):
N O . N N N
L I N E 1 0 A C B
Automatic Line Selection:
Intercom Line
2. CO Line
N O . N N N
U S I N G L I N E 1 1 1
3. Dial Access Code
N O .
U S I N G L I N E 2 0
Alphanumeric Messages:
Busy Field:
When you set automatic callback at a busy station, its number is displayed.
When you receive an automatic callback, the station number you called is
displayed.
When you receive an automatic callback for a Central ‘Office (CO) line, the
seized line’s number is displayed.
If your station automatically accesses an intercom line when you go off-hook,
INT is displayed.
If your station automatically accesses a Central Office (CO) line when you go
hook, the number of the seized CO line is displayed.
When you access a Central Office (CO) line by dialing a CO line group access
code, the accessed CO line number is displayed.
Messages of up to 32 characters may be used in alphanumeric messaging.
Messages may either be programmed or set as one-time messages. (Messages
may also be used with a timed reminder.)
The Busy Field display indicates, in groups of 10, the last two digits of the station
numbers that are busy or set for Do Not Disturb (DND). The top display indicates
that stations and Xl7 are either in use or in DND mode; the bottom
display indicates the same for stations X27, X32, X34, and X39. If the
Page
button is pressed, the group will change to and the
states of that group of stations will be displayed. The station groups will
increment each time the
Page
button is pressed, thereby eventually displaying
all stations..