Toshiba Strata DK280 - Manual (Page 38)

2. Dial 8 NN (NN
4 9,
6 0 9
NNN
6 9 9).
3. Press the
Page
button to scan the
directory for the
appropriate
number/memo.
4. Press any available
CO button.
5. The number is dialed.
To Check a Speed Dial
Number:
1. Press
Mode 8 when
telephone is idle.
2. Dial a 2-digit speed
dial number.
3. Press the
Page
button to scan the
directory for the
appropriate
number/memo.
To Set a Timed Reminder
with Memo:
1. Press the
Intercom
button.
2. Dial a 3-digit reminder
number
(# 6 0 5 # 6 0 9).
3. Enter the desired time
for the message to be
displayed.
4. Dial 0 if the message
is to be repeated every
day, or
1 if it is a one-
time message only.
4-8
The speed dial number appears with name or memo. Personal speed dial code
numbers are 10 49, and system numbers, stored from station 200 only, are 60
99 or 600 699, depending on your system size.
NOTE:
The station must be enabled via system programming for LCD message
memory
Personal speed dial number (10 49) or system number (600 699).
If the number is longer than 16 digits, a will appear in the far right corner of
the display. Press the Scroll button to display the remaining digits.
TIMED REMINDERS WITH MEMO
This feature allows separate messages to be set at each LCD station. These
messages will be displayed at the times (hour and minute) set by the station
user. They can either be displayed just once or repeated on a daily basis.
The 3-digit reminder number may be # 6 0 5 # 6 0 9.
The message time must be in 24-hour clock format (i.e., HHMM).