Thermador CM302 - Manual (Page 58)

CM Oven Care and Use Manual
Do-It-Yourself Maintenance
FAHRENHEIT TO CENTIGRADE
The oven has been preset to a Fahrenheit tem-
perature.
To Change to Centigrade, follow these steps:
I. Turn off all ovens.
2. Touch and hold the or the OFF pad and then
the CONVECTION pad.
3. F appears in the temperature digits; release all pads.
4. Touch CONVECTION and C replaces F. This
alternates when CONVECTION is touched.
5. To complete the change, touch or OFF.
THERMOSTAT CALIBRATION
The electronic thermostat has been preset to
0
°
F and accurately maintains its setting. If the
browning results are too light or too dark for your
preferences, you can raise or lower the setting.
To change the Calibration of the Oven
Temperature:
1. Turn off both ovens.
2. Touch and hold the pad in a double oven or
the OFF pad in a single oven; touch the BAKE pad.
3. 0 appears in the temperature digits; release all pads.
4. Touch BAKE and 0 changes in increments of 5 degrees
each time it is touched. The maximum adjustment is
±
35ºF In Centigrade the range is
±
3ºC to 21ºC.
5. To complete the change, touch or OFF.
To calibrate the lower oven in double oven
models, repeat the steps with this exception:
touch the instead of the pad. LOWER
OFF
UPPER
OFF
UPPER
OFF
UPPER
OFF
Do-It-Yourself Maintenance
Page 56
The oven has been preset to a
12-hour clock format.
To Change the Time-of-Day Clock
to a 24-Hour Clock, follow these
steps:
1. Turn off all ovens.
2. Touch and hold the in a double oven
or the OFF pad in a single oven, then touch
the CLOCK pad.
3. 12H appears in the Clock window; release
all pads.
4. Touch CLOCK and 24H replaces 12H. This
alternates when CLOCK is touched.
5. To complete the change, touch or
OFF.
CHANGING THE CLOCK FORMAT
UPPER
OFF
UPPER
OFF
UPPER
OFF
UPPER
OFF