TechniSat DigiBox VIACCESS - Manual (Page 31)

7.3 Locking Channels
You have the facility to lock specific channels (parental lock). A locked programme will only
be shown on the TV screen if you enter your personal PIN after selecting the channel. This
number need be entered only once during an operating session, i.e. the locking will only
become operative again the next time the receiver is switched on (standby).
In order to block a specific channel, follow this procedure:
>
Press the Menu key to display the Main Menu .
> Use the
up/down arrow
keys to select
TV Programs
, if you wish to block vie-
wing of TV channels, or Radio Programs if you wish to block radio stations.
> Confirm with the OK key.
The sub-menu
>Programs
will be displayed.
> Use the up/down arrow keys to mark the entry Lock .
> Confirm with the OK key.
The
User List
will be displayed.
> Use the arrow keys to mark the channel/station you wish to have locked.
> Confirm with the OK key.
The channel will be marked with a red cross in the list.
> You can repeat this process as often as required to lock all channels you wish to lock.
> Press the Menu key to return to normal operation.
> In order to activate the parental control function, you must still enter your personal
PIN in the following point
Change PIN , and then activate the parental lock as
described in Point 5.2 (Basic Settings)
7.4 Change PIN
The PIN is set at the factory to 0000 . In order to activate the programme locking function,
you must still enter your own personal PIN in the place of the factory default setting.
Please Note! Be sure not to forget your PIN number. If you do ever forget
it, please contact your retailer!
In order to change the PIN number, follow this procedure:
>
Press the Menu key to display the Main Menu .
> Use the
up/down arrow
keys to mark the entry
Settings
.
> Confirm with the OK key.
The sub-menu Settings will be displayed.
> Use the
up/down arrow
keys to mark the entry
Change PIN
.
> Confirm with the OK key.
> Now enter the PIN of your choice by means of the numeric key pad - you may
choose any 4-digit number you like.
> Repeat the entry.
> Press the OK key to return to the Settings menu.
7.5 Programming the Electronic Programme Guide
In this chapter we describe how you can add programmes/channels to the Electronic Pro-
gramme Guide, or delete them. You thus have the facility to customise the Electronic Pro-
gramme Guide according to your personal preferences, giving you a better view of the pro-
grammes available.
31
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 31