Thecus Technology i Series - Manual (Page 70)

read/write error <read | write> failed.
Error PD read/write error Error: PD <#> lba <#> length <#> <read | write>
error.
Error UDV recoverable
read/write error Error: UDV <name> stripe <#> PD <#> lba <#>
length <#> <read | write> recoverable
Error UDV unrecoverable
read/write error Error: UDV <#> stripe <#> PD <#> lba <#>
length <#> <read | write> unrecoverable
Info UDV stripe rewrite
start/fail/succeed Info: UDV <name> stripe <#> rewrite column
bitmap <BITMAP> <started | failed | finished>.
C. Microsoft iSCSI Initiator
Here is the step by step to setup Microsoft iSCSI Initiator. Please visit Microsoft
website for latest iSCSI initiator. The following setup may not use the latest
Microsoft iSCSI initiator.
1. Run Microsoft iSCSI Initiator version 2.03. Please see Figure C.1.
2. Click “Discovery”.
Figure C.1
3. Click “Add”. Input IP address or DNS name of iSCSI storage device.
Please see Figure C.2.
- 70 -