Toshiba TEC FS-1450 - Manual (Page 122)

– 48 –
EO1-11097
SALESPERSON CODE AND NAME PROGRAMMING (Submode 20)
By programming Salesperson Codes here, those codes may be used in sales entries. In addition, the
name of each salesperson can be programmed in maximum 12 characters.
Programming
Any time outside a sale
Mode Lock: SET
20 [X] | Salesperson Code | [ST] Character Entries [ST] [AT/TL]
1 to 99
*
See NOTE 1 below.
Repeat for other salespersons. * For sequentially programming codes, the code
number specification can be skipped.
NOTES: 1. A maximum of 12 regular-sized or 6 double-sized characters may be programmed for
a name. A combination of both types is also available.
2. Even if no name is programmed (i.e. skipping the Character Entries before the sec-
ond [ST] key) for a Salesperson Code, that code can be used in sale entries. Then,
auto-preset ID symbol “S P xx” (xx = Salesperson Code) will be printed instead of a
name on a receipt, etc.
ex.) To program the following Salesperson Codes and names:
Code Name Mode Lock: SET
20 [X].
1 White 1 [ST] (Salesperson Code 1)
W
h
i
t
e [ST]
2 Stacy 2 [ST] (Salesperson Code 2)
S
t
a
c
y [ST]
3 Jansen 3 [ST] (Salesperson Code 3)
J
a
n
s
e
n [ST]
[AT/TL]
..
.
P 2 0
01 White
02 Stacy
03 Jansen
0047
TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437
Open 8:00am to 7:00pm
Closed : every Wednesday
12-19-1994 MON #1
OPERATION
CONDITION