Toshiba 36ZP18Q - Manual (Page 15)

15
Select the TIMER option from the top menu bar.
Select the On timer (or the Off timer ). If, for
example, you want the TV to turn ON (or OFF) in
one and a half hours time, enter 01:30 using the
numbered buttons on the remote control.
If setting the Off timer press EXIT. If setting the
On timer , you must enter the programme
position number you want to watch. You must put
the set into Standby mode by pressing the
i
button.
Any equipment connected with Scart leads must
also be put into Standby mode to prevent them
being displayed when the timer switches on.
When the On timer has been set, the GREEN On
timer indicator on the front of the TV will be lit
(see page 6).
If the On timer has been set, you do not have to
wait to watch the television. You can bring the set
back to life by pressing the
i button. However, the
GREEN timer light will stay on until the set tim
e
period has passed, at which point the TV will go to
the chosen channel. This feature can help you
avoid missing your favourite programmes.
FEATURES
The timer, time display, panel lock
and stereo/bilingual transmissions
The time display facility allows you to see the current time
on the TV screen.
If you press the 8 / 9 button on the remote control
whilst watching a normal TV broadcast you will see a
time display from the broadcaster.
It will remain on the screen for about 5 seconds.
1
2
1
3
4
The Time Display
Panel Lock
From the FEATURE MENU select Panel lock and
choose ON or OFF with the Sor R buttons.
TIMER
0 – 9 : To set
EXIT : To exit
You can tell the TV to turn itself ON or OFF after a
certain time.
Panel lock allows you to disable the buttons on the front
of the TV set. You can though, still use all of the
buttons on the remote control.
The Timer
Stereo and Bilingual transmissions
To cancel the On timer , enter zero in each
position including the programme position.
Off timer 00:00
On timer 01:30 P02
FEATURE MENU
▼
▼▼
▼
▼
▼
▼
▼
AV connection
Picture size/position
Surround set up
Panel lock OFF
Automatic format ON
Blue screen ON
▼
When Panel lock is ON , you will be reminded
on the screen when you press any of the front
panel buttons. Once the set has been switched
off it can ONLY be brought out of standby
using the remote control.
If stereo or dual language broadcasts are transmitted the
lights on the front of the TV will be lit. The word Stereo or
Dual will appear on the screen, disappearing after a few
seconds. The display will reappear each time you
change programme positions, provided that the broadcast
is in stereo. If the broadcast is not in stereo the word
Mono will appear.
Stereo… Choose the required programme number.
Press the
O I/II button repeatedly, to select between
Stereo and Mono .
Bilingual… Bilingual transmissions are rare. If they are
transmitted the word
Dual will display. Choose the
required programme number and if the word Dual does
appear press the O I/II button to select between
Dual 1 , Dual 2 or Mono .