Toshiba 36ZP18Q - Manual (Page 17)

SPECIAL SOUND FEATURES
17
Dolby Digital
Dolby Digital is available from DVD players, some games console players, etc. These must be connected
using a Scart or phono lead for the picture AND an optical or a coaxial cable for the sound see page 24.
Dolby Digital
Adjustments
Set the volume and balance of the front speakers to your preference.
Play a Dolby Digital source and press the M button on the TV’s remote control.
The title, e.g. Dolby Digital 3/2, is an indication of the channels available from
your current sound source, see the table.
To adjust the levels, use the P or Q button to select the centre and two rear
speakers in turn. Press either the S or Rbutton to adjust. The number of
adjustable speakers will depend upon the signal received from the DVD player.
To cancel the test press the EXIT button.
1
1
2
3
4
2
From the FEATURE MENU select Surround set up .
With Delay time highlighted, press the R button then
use the S or R button to change the setting to a
value that suits you.
Press EXIT when you have finished.
1
2
3
3
4
Dolby Digital
1/0 = Centre speaker only.
2/0 = Front Left and Front Right only.
2/1 = Front Left and Front Right +
Rear Left and Rear Right combined.
2/2 = Front Left and Front Right +
Independent Rear Left and Independent Rear Right.
3/0 = Front Left and Front Right and Centre.
No Rear Speakers.
3/1 = Front Left and Front Right and Centre +
Rear Left and Rear Right combined.
3/2 = Front Left and Front Right and Centre +
Independent Rear Left and Independent Rear Right.
Arrange the speakers around your normal viewing positions
(as shown on page 5) and then make sure that the TV
is set up as follows:
DELAY TIME…
If you sit a long way from the TV and close to the rear
speakers the sound from the rear will reach you before the
sound from the front. You can use a higher setting in the
Delay time option to restore the correct balance.
If rear speakers are NO
T selected in the
Surround set up
menu, you will not hear any
sound from your rear speakers.
!
Alternatively, use the Test mode in
the
SURROUND SET UP menu, see pa
ge 18.
If the DVD playing is recorded in D
olby Pro Logic,
i.e. 4 channel stereo (front le
ft, front right, centre
and rear) the TV will detect the 4 ch
annels.
In this instance, when the Surroun
d Test Mode
is run the TV will cycle through the fo
ur channels
in use.
In order to get full Dolby Digital, th
e DVD
player must be connected using th
e coaxial
or optical links.
!
The DVD/Games console is connected to the TV using
phono leads to the COMPONENT VIDEO INPUT or a
Scart lead to Scart 3, and an optical or coaxial cable to
the optical/coaxial sockets, DA-1 or DA-2.
The Digital input-1 (optical)/ Digital input-2 (coaxial)
in the AV connection menu (see page 16) is set to
EXT 3 if Scart 3 is used or EXT 4 if the equipment is
connected to COMPONENT VIDEO INPUT.
External front speakers are connected
and the external switch (found on the
back of the TV) is set to EXT. You will not hear the centre
channel without external front speakers connected.
Rear speakers are connected and the Rear speaker
option in the Surround set up menu is set to YES.
(See next page.)