Topcom BUTLER 4552 - Manual (Page 28)

28 Topcom Butler 4552/Twin/Triple/Quattro
Topcom Butler 4552/Twin/Triple/Quattro
• If the date and time is entered incorrectly, the unit shall ask to re-enter the day/time
• The unit shall ask to press ‘1’ for main menu.
8 Troubleshooting
9 Topcom warranty
9.1 Warranty period
The Topcom units have a 24-month warranty period. The warranty period starts on the day
the new unit is purchased. The warranty on batteries is limited to 6 months after purchase.
Consumables or defects causing a negligible effect on operation or value of the equipment
are not covered.
The warranty has to be proven by presentation of the original purchase receipt, on which the
date of purchase and the unit-model are indicated.
Symptom Possible cause Solution
No display Batteries uncharged Check the position of the
batteries
Recharge the batteries
Handset turned OFF Turn ON the handset
No tone Telephone cord badly
connected Check the telephone cord
connection
The line is occupied by
another handset Wait until the other handset
hangs up
The icon flashes Handset out of range Bring the handset closer to
the base
The base has no power
supply Check the mains connection
to the base
The handset is not registered
on the base Register the handset on the
base
Base or handset do not ring The ringing volume is zero or
low Adjust the ringing volume
Tone is good, but there is no
communication The dialling mode is wrong Adjust the dialling mode
(pulse/tone)
Not possible to transfer a call
on PABX The FLASH time is too short Set the unit to Long Flash
time
Telephone does not react to
pressing the keys Manipulation error Remove the batteries and put
them back in place