TANDBERG D14049.04 - Manual (Page 246)

246
D14049.04
JULY 2008
Grey Headline (continued)
DisconnectCall
Disconnects a call.
Call: <1..900>
The index of the call to be disconnected.
CallSerialNumber: <S: 1, 255>
The serial number of the call to be disconnected.
Note: you must specify either a call index or call serial number when using this command.
Example: xCommand DisconnectCall CallSerialNumber: "6d843434-211c-11b2-b35d-0010f30f521c"
DomainAdd
Adds a SIP domain for which this VCS is authoritative.
DomainName (r) : <S: 1, 128>
Specifies a domain for which this VCS is authoritative. The VCS will act as a SIP Registrar and Presence Server for this domain, and will accept registration requests for any SIP
endpoints attempting to register with an alias that includes this domain.
Example: xCommand DomainAdd DomainName: "example.com"
DomainDelete
Deletes a domain.
DomainId (r) : <1..20>
The index of the domain to be deleted.
Example: xCommand DomainDelete DomainId: 2
FeedbackDeregister
Deactivates a particular feedback request.
ID: <1..3>
The index of the feedback request to be deactivated.
Example: xCommand FeedbackDeregister ID: 1
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices Applications Maintenance
Command Reference - xCommand