TANDBERG D14049.04 - Manual (Page 263)

263
D14049.04
JULY 2008
Grey Headline (continued)
SIP: {Visible if SIP Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {Visible if Status is Failed} <No response from gatekeeper/DNS resolution failed/Invalid IP address>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
TraversalClient: {Visible if Type is TraversalClient}
Peer [1..6]:
H323: {Visible if H323 Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {Visible if Status is Failed} <No response from gatekeeper/DNS resolution failed/Invalid alias/Authentication Failed/Invalid IP address>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
SIP: {Visible if SIP Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {Visible if Status is Failed} <No response from neighbor/ DNS resolution failed>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
TraversalServer: {Visible if Type is TraversalServer}
SIP:
Port: <Active/Inactive>
H323:
Port: <Active/Inactive>
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices Applications Maintenance
Command Reference - xStatus