Warning, Direct wall mounting – TOA Electronics HX-5B User Manual
Page 13
[Direct wall mounting dimensions]
(Angle mode of 60
°)
408 (16
1/16
)
131 (5
5/32
)
4-12 x 41 (4-
15/32
x 1
39/64
)
546 (21
1/2
)
181 (7
1/8
)
6 (
15/64
)
23 (
29/32
)
Unit: mm (inches)
Rear plate
Speaker system
[Direct wall mounting dimensions]
(Angle mode of 60
°)
Unit: mm (inches)
546 (21
1/2
)
Rear plate
Speaker system
181 (7
1/8
)
6 (
15/64
)
408 (16
1/16
)
23 (
29/32
)
131
(5
5/32
)
4-12 x 41 (4-
15/32
x 1
39/64
)
13
11. DIRECT WALL MOUNTING
Note: Anchor bolts, nuts, and washers are not supplied with the speaker system.
11.1. Vertical Installation
11.2. Horizontal Installation
Observe the following instructions when mounting the speakers on a wall.
Doing otherwise may cause the speaker system to fall, potentially
resulting in damage and/or personal injury.
• Use anchor bolts, nuts, and washers with specifications appropriate for
carrying the load of the speaker system. Also ensure that the structure
of the wall is robust enough to stand the weight of the speaker.
• Take measures to prevent nuts and bolts from loosening and sliding out
of their positions as required.
WARNING
Note
For outdoor use, install the HX-5B-WP or HX-5W-WP in conjunction with the HY-WM1WP Speaker Mounting
Bracket so that all speaker modules point downward from the horizontal. Failure to do so could adversely
affect their water-resistant capability, leading to malfunction.