Olympus DS-2200 - Manual (Page 21)

21
2
If you start recording after inserting the earphone into the jack on the recorder, you can hear the
sound being recorded. The sound volume on the recording monitor can be adjusted by pressing
the VOL (+) or VOL (–) button.
1 Make sure that the recorder has stopped.
2 Connect the earphone to the jack on the recorder.
After recording is started, you can hear the sound being
recorded through the earphone.
.......................................................................................................
Notes
• Recording cannot be monitored during recording with an external
microphone.
• Recording level cannot be controlled using the volume button.
• When recording using the remote controller microphone, recording
cannot be monitored even though the earphone is connected to the
EAR jack on the remote controller.
• When using the earphones, do NOT set the volume too high. Listening
at very high volume may lead to hearing loss.
Listening While Audio Is Recorded
(Recording Monitor)
Listening While
Audio Is Recorded (Recording Monitor)