Technics SC-EH760 - Manual (Page 19)

19
Basic operations
RQT5355
B
A
F , G
G F
G F
DECK 1/2
Cassette tapes
»
A Fast-forwarding and rewinding
Press [
6
] or [
5
] while the tape is
stopped.
For your reference:
³ Each deck’s play direction is stored in the system’s memory.
³ You can fast forward or rewind the tape while you are playing or
recording a tape in another deck. Press [DECK 1/2] to switch to the
non playing deck, and then press [
6 ] or [ 5 ]. After the above
operation, be sure to press [DECK 1/2] to reselect the deck in which
you are playing a tape.
»
B Tape program sensor (TPS)
TPS finds the beginning of a track and resumes play from there.
Press [
6
] or [
5
] during play.
Tape direction rewind fast-forward
! 6 5
" 5 6
Dolby noise reduction manufactured under license from
Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Note
TPS may not operate correctly in the following situations:
If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent parts within tracks.
Dolby noise reduction
Dolby NR reduces “hissing” when playing tapes. It increases the high
frequency region when recording and then reduces it in playback.
Use the same system during playback and recording. This unit has
Dolby B NR which reduces noise to a third.
Prerecorded cassettes and equipment marked “
ë ” use Dolby B NR.
Tape direction backward forward
! 6 5
" 5 6