Toshiba M40 - Manual (Page 186)

4 Replacement Procedures 4.16 Switch Cover and Switch Board
4.16 Switch Cover and Switch Board
Removing the Switch Cover and Switch Board
Remove the Switch Cover and Switch Board according to the following procedures and
Figure 4-38, 4-39.
1. Remove the following 6 latches on the switch cover, in that order:
-Three latches on each of the left and right sides
Figure 4-38 Removing the switch cover
2. Disconnect the switch board flat cables from CN3002 on the switch board.
3. Remove two M2.5x4 black flat-head screws.
4. Remove the switch board.
4-52 EQUIUM M40/M45 / Satellite M40/M45 Maintenance Manual