Listening to a cd – Teac AD-800 User Manual

Page 18

Advertising
background image

18

Listening to a CD

1

Press the SOURCE button repeatedly to select “CD”.

When a different source is selected, pressing the CD Play (U)

button automatically selects the CD and, if a disc is loaded, starts
playback.

2

Press the CD OPEN/CLOSE (-) button to open the disc

tray.

3

Place a disc on the tray with the label side up.

Always confirm that the disc is centered on the tray. The disc

must be centred on the disc tray. If a disc is not correctly loaded,
it might not be possible to open the tray again after it has been
closed.

CAUTION
Do not load more than one disc.
Do not force the tray by hand when opening and closing it.
Do not attach adhesive labels or similar materials to either side

of a disc.

Do not use irregularly-shaped discs.

Failure to follow any of the above cautions could cause
malfunction.

4

Press the CD OPEN/CLOSE (-) button again to close the

tray.

CAUTION

Be careful not to let your finger be pinched by the tray.

Loading a disc takes a few seconds.
During loading, “READING” appears on the display and no
buttons will work. Wait until the total number of tracks/files is
displayed.

When no disc is loaded, “NO DISC” is displayed.

5

Press the CD Play (U) button to start playback.

Playback starts from the first track/file on the disc.

If you load a disc, and then press the CD Play (U) button

without having first closed the disc tray, the disc tray closes and
playback starts.

When playback of all the tracks/files has finished, the unit stops

automatically.

MP3 files that are not placed in folders are automatically put in

the “ROOT” folder. Playback starts from the first file in the ROOT
folder.

See page 38 for information about the playback order of MP3

discs.

Advertising