Toshiba 65HC15 - Manual (Page 7)

Intr
oduction
Connecting
y
our Monitor
Using the
remote contr
ol
Setting up
y
our Monitor
Oper
ating y
our
Monitor
Appendix
Index
7
(E) 65HC15
INPUT EXIT MENU VOLUME
VIDEO S-VIDEO AUDIO L/MONO R
VIDEO 3 IN
OUT 1
IR
OUT 2
Introduction
Welcome to Toshiba
Thank you for purchasing this Toshiba Monitor, one of the innovative
projection monitors on the market. The goal of this manual is to
guide you through setting up and operating your Toshiba monitor as
quickly as possible.
This manual applies to model 65HC15. Before you start reading,
check the model and serial numbers on the back of your monitor.
Write these numbers in the space provided on the front cover of this
manual for your records.
Instructions in this manual are based on using the remote control.
You also can use the controls on the monitor’s front panel if they have
the same name as those on the remote control.
Please read all the safety and operating instructions carefully, and keep
the manual for future reference.
Exploring your new monitor
You can operate your monitor using the buttons on the front panel or
the remote control. The back panel and front panel (behind the door)
provide all the terminal connections you will need to connect other
equipment to your monitor. See “Connecting your Monitor” on page
8.
1 2 3
4 5 6
7 8 9
ENT 100 0
POWER RECALL INPUT
+10
PIC
S IZE
EXIT
INFO
STOP
MUTE SLEEP
TV/VCR PAUSE
FF REW SKIP / SEARCH
SPLIT
SWAP
LIGHT REC
FREEZE SOURCE
PLAY
TV
CBL/SAT
VCR
DVD
VOL CH
ENTER
DVDMENU
MENU
TO
P ME NU
CL
EA
R E N TE
R
CT-90232
Back
Front Remote sensor (behind the screen)
Video 3
Video/audio inputs
(behind the door)
MENU
INPUT
HDMI IN
EXIT
Volume x •
Variable Audio OUT
VIDEO 1/2
ColorStream
HD1/HD2
Audio OUT
Remote control
POWER
Power
indicator
IR OUT
NOTE: THIS MONITOR DOES
NOT CONTAIN A TUNER.
A set-top box (i.e., cable box or
analog/digital receiver) is required to
receive: (1) analog and/or digital
broadcast signals from an antenna;
and (2) analog and/or digital cable.
For more information, refer to the
applicable connection and setup
instructions in this owner’s manual.
THIS MONITOR REQUIRES
COLOR CONVERGENCE
ADJUSTMENT AFTER
SETTING UP.
Convergence may drift as a result of
relocating or adjusting the position of
the MONITOR. After setting up your
MONITOR, it is recommended that
you set the convergence.
For instructions on adjusting the color
convergence, see page 25.
#01E_07_65HC15 5/20/05, 4:22 PM 7
Black