Transcend Information INTEL SOCKET 370 CELERON SERIES TS-ABX31 - Manual (Page 20)

BIOS SETUP
16
CHAPTER 3 BIOS SETUP
3.1 BIOS Setup
Award BIOS has a built-in Setup program that allows users to modify the basic system configu-
ration. This information is stored in CMOS RAM. So it can retain the Setup information when the
power is turned off. When the battery of CMOS fails, it will cause the data lost. When it happens,
you should set up your configuration parameters again after replacing the battery.
3.2 The Main Menu
As you turn on or reboot the system, the BIOS is immediately activated. It will read the system
configuration information, and check the system through Power On Self Test (POST). During the
POST process, press the [Del] key, and you can enter the Award BIOS configuration system. The
following screen will appear.
In the Award BIOS system, you can use the arrows ( ) to highlight the item, and press
the [Enter] key to enter the sub-menu. The following keys help you navigate in Setup.
Esc Main Menu: Quit and not save changes into CMOS RAM
Other pages: Exit current page and return to Main Menu
PgUp Increase the numeric value or make changes
PgDn Decrease the numeric value or make changes
+ Increase the numeric value or make changes
- Decrease the numeric value or make changes