Transcend Information INTEL SOCKET 370 CELERON SERIES TS-ABX31 - Manual (Page 22)

BIOS SETUP
18
3.3 Standard CMOS Setup
•
SUPERVISOR / USER PASSWORD
Change, set, or disable a password. In some BIOS versions that allow separate user and
supervisor passwords, only the supervisor password permits access to Setup. The user pass-
word generally allows only power-on access.
•
IDE HDD AUTO DETECTION
Automatically detect and configure IDE hard disk parameters.
•
SAVE & EXIT SETUP
Save settings in nonvolatile CMOS RAM and exit Setup.
•
EXIT WITHOUT SAVING
Abandon all changes and exit Setup.
•
Date (mm:dd:yy) / Time (hh:mm:ss)
Highlight the items and use PageUp/PageDown to change the value of Date/Time.
•
Primary Master / Primary Slave / Secondary Master / Secondary Slave
This mainboard can support four IDE devices. We recommend that you select type “AUTO”
for all drives. The BIOS can automatically detect the specifications and optimal operating
mode of almost all IDE hard drives. When you select type “AUTO” for a hard drive, the BIOS
detects its specifications during POST while the system boots. If you do not want to select
drive type “AUTO”, other methods of selecting the drive type are also available.