Tash limited 51150 - Manual (Page 8)

8
3. Self Calibrating Mode
When the switch is being activated by a body part that cannot always maintain a
constant activation distance from the sensor, the switch can be operated in self
calibrating mode. In this mode, placing the activating body part at ANY given
distance within range of the switch will serve to define that distance as the
activation distance. Once activated at this distance, the switch may be turned off
by moving the body part completely out of the range of the sensor.
To set the self calibrating mode:
1. Turn the sensor box off.
2. Set the dip switches to: SW3 Down
SW4 Up
3. Position the sensor.
4. Place the body part in front of the sensor.
5. Turn the sensor box on.
Once activated the switch will be turned on by moving the body part any where
within the range of the sensor.