Topcom ALLURE 200 - Manual (Page 10)

10 Topcom Allure 200
Topcom Allure 200
• Press the Phonebook button
• Edit the name when necessary.
• Press the Phonebook button
• Edit the number when necessary.
• Press the Phonebook button
• Press the Phonebook button twice to leave the phonebook.
7.5 Erasing a number and name from the Phone Book
• Select the desired number from the Phone Book by name as mentioned in 7.3.
• Press the Erase button for 2 seconds , “ERASED“ appears on the display.
• Press the Phonebook button to leave the menu.
8 Memory numbers
You can program 8 Direct numbers (max 16 digits). These memory numbers can be dialled
by pressing M1-M8.
8.1 Adding a number to a Direct Memory
• Press M1 for 2 seconds.
• Enter the telephonenumber.
• Press the desired Direct Memory key (M1-M8)
Direct memories can only be overwritten not erased.
8.2 Calling a Direct Memory number
• Press the desired Direct Memory key, the stored number is displayed.
• Press handsfree or pick up the handset.
9 Sleep mode
To avoid that you are disturbed during a specific period, you can activate the sleep mode.
The telephone will not ring during sleep mode, except for calls dedicated as VIP in the call
list. VIP calls will always ring.
Once the sleep mode time is past, the telephone will always ring.
• Press the Music on Hold/Sleep button for 2 seconds
• Press the Sleep button repeatedly to select the sleep time (0-24 hours in steps of 1
hour)
• Press the dial key to confirm the setting
To disable the sleep mode, follow the same steps and select 00-00
10 Alarm
The allure 200 has an alarm function.