11 safety instructions, 12 cleaning, 13 disposal of the device (environment) – Topcom ALLURE 200 User Manual

Page 11

Advertising
background image

Topcom Allure 200

11

Topcom Allure 200

ENGLIS

H

To set the alarm:

Press the alarm button for 2 seconds

Press the Up or Down button to select the hour

Press the alarm button to confirm

Press the Up or Down button to select the minutes

Press the alarm button to confirm

To activate/deactivate the alarm

Press the alarm button briefly to switch the alarm On or Off.
When ON, the alarm icon is shown on the display.

The alarm sound is the same melody as the ‘music on hold’ melody (see 5.3)
When the alarm sound is heard, press the handsfree button twice, otherwise the melody
will continue for one minute.

11 Safety Instructions

Do not place the basic unit in a damp room or at a distance of less than 1.5 m away from a
water source. Keep water away from the telephone.
Do not use the telephone in environments where there is a risk of explosions.
Dispose of the batteries and maintain the telephone in an environment-friendly manner.

12 Cleaning

Clean the telephone with a slightly damp cloth or with an anti-static cloth. Never use cleaning
agents or abrasive solvents.

13 Disposal of the device (environment)

At the end of the product lifecycle, you should not throw this product into the
normal household garbage but bring the product to a collection point for the
recycling of electrical and electronic equipments. The symbol on the product,
user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling

point. By re-using some parts or raw materials from used products you make an important
contribution to the protection of the environment.
Please contact your local authorities in case you need more information on the collection
points in your area.

Advertising