Telenetics V.34-SDC - Manual (Page 193)

Country-Specific Information C-19
C
ountr
y
-Specif
ic
Inf
o
rmation
Phone Connector Interface (Models 3260/3265)
Connection to an external telephone can be made using the PHONE connector on the
modem’s rear panel. Table C-3 describes PHONE connector interface pinouts.
Dial Line Interface (Models 3261/3266)
Dial line connection is made via the DIAL LINE interface on the modem’s rear
panel. Table C-4 describes DIAL LINE connector pinouts.
Table C-3.
Phone Line Interface (Models 3260/3265)
Phone Line
Connector Pin Canada/
U. S. A.* Hong Kong/
United Kingdom All Other
Countries
1 Not Connected Not Used Not Used
2 Not Connected B Not Used
3 MI Bell Shunt Not Used
4 Ring Not Used Telset Ring
5 Tip A Telset Tip
6 MIC Not Used Not Used
7 Not Connected Not Used
8 Not Connected Not Used
*Refer to Canada/U. S. A. country-specific sections for rear panel pinouts cross-referenced with telco
jack selections.
Table C-4.
Dial Line Interface (Models 3261/3266)
Dial Line
Connector
Pin
Canada/
U. S. A. Germany/
Austria Hong Kong/
United Kingdom Japan All Other
Countries
1 MB LA Not Used Not Used Not Used
2 MB1 Not Used B Not Used Not Used
3 M1 Ring
Indicator Bell Shunt Not Used Telset Ring
4 Ring LB Telset Ring Ring Ring
5 Tip b2 A Tip Tip
6 MIC Not Used Telset Tip Not Used Telset Tip
7 PR Not Used Not Used Not Used
8 PC a2 Not Used Not Used