Toshiba 32AV500A - Manual (Page 23)

23
Using the TV’s features (General)
Setting the Banner Duration
- digital / analog -
Press , then Y or Z to display the TIMER menu, then
press .
Press
Vor U to select Banner Duration, then press .
Press Y or Z to set Banner Duration which can be set
1 to 12 seconds.
Notes:
Banner Duration function is setting for DTV information and
on-screen information display timing.
On-Screen-Display will remain about 1 minute.
Selecting the video input source to
view
Press on the remote control to display the video input
mode list, then press
V or U to select appropriate input
source. You may also press to display the video input
mode.
Press .
DTV (Digital TV)
Video 1 (CVBS input or component video input)
(

page 27)
Video 2 (CVBS input or S-video input) (

page 27)
HDMI 1, HDMI 2 ( HDMI1 or HDMI2, HDMI
input)
PC (
RGB/PC, PC input)
ATV (Analog TV)
1
2
3
•
•
1
2
Teletext in Analog TV
This TV has a multi-page teletext memory, which takes a few
moments to load and it offers two ways of viewing Teletext
Auto and LIST which are explained below.
Setting up the teletext mode
To select teletext mode:
Select a channel position with the desired teletext service.
Press , then press
Y
or
Z to display the FUNCTION
menu.
ATV Menu...[FUNCTION...Teletext Mode]
Parental Rating
Password
EXIT OK MENU Confirm Return Navigate Cancel
Reset to default
AV Connection
Teletext Mode
Press
V or U to select Teletext Mode, then press Y
or
Z to select Auto or LIST mode.
ATV Menu...[FUNCTION...Teletext Mode]
Parental Rating
Password
EXIT OK MENU Confirm Return Navigate Cancel
Reset to default
AV Connection
Teletext Mode
Auto Teletext Mode
Note:
When you are watching the teletext program, SET UP menu
and FUNCTION menu are not selectable.
Teletext general information
button:
Pressing once will bring up the teletext screen.
Press again to superimpose the teletext over a normal
broadcast picture. Press again to return to normal TV mode.
You need to return to normal viewing if you wish to change
channels.
When you first press
to access the text service, the
first page you see will be the initial page.
In Auto mode, this displays the main subjects available and
their relevant page numbers.
In LIST mode, you will see the page numbers currently stored
on the each color button
Sub-pages:
Once in this chosen page, if there are sub-pages they will
automatically load into memory without changing the one you
are reading. If there are many sub-pages, it will take a long
time for them all to load and this will depend on the speed with
which the broadcaster transmits them.
To access the sub-pages in memory, press
, then use
Y
or
Z
to view them.
Note:
If you press
while the picture mode is activated, this mode
will be cancelled.
1
2