Toshiba 42HM66 - Manual (Page 24)


En
gl
ish
Copyright © 2006 TOSHIBA CORPORATION. All rights reserved.
7
Using the TV's features
Using the TV/DTV SETTING
menu
See "Navigating the menus" on page 0.
TV SYSTEM
Select your TV system (CABLE STD,
CABLE HRC, CABLE IRC, or ANTENNA).
See "Navigating the menus" on page 0.
AUTO SCAN
To automatically scan and store all active channels
into the TV's channel memory:
• In the AUTO SCAN sub-menu, select YES and
press ENTER.
To retain your current channel memory settings:
• In the AUTO SCAN sub-menu, select NO and
press ENTER.
CHANNEL EDIT
Use this feature to manually add and delete channels
in the TV's channel memory.
To manually add a channel to the channel memory:
. Use the Number buttons on the remote control to
tune the TV to the channel you want to add.
. In the CHANNEL EDIT sub-menu, select ADDED,
press ENTER, and then press EXIT.
To manually delete a channel from the channel
memory:
. Tune the TV to the channel you want to delete.
. In the CHANNEL EDIT sub-menu, select SKIPPED,
press SEL, and then press EXIT.
LOCAL TIME (applies to DTV only)
In the LOCAL TIME sub-menu, select your
time zone (CANADA, EASTERN, CENTRAL,
MOUNTAIN, PACIFIC, ALASKA, HAWAII, SAMOA,
or NEWFOUNDLAND) and then press EXIT.
DAY LIGHT (applies to DTV only)
When the DAY LIGHT feature is set to ON, the
LOCAL TIME will automatically be adjusted for
daylight savings time.
In the DAY LIGHT sub-menu, select ON or OFF,
and then press EXIT.