Technicolor - Thomson DTH 2000 - Manual (Page 16)

16
DVD remote control
. . . . . . . . . . . . . . . . . . .
6-7
Menus
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Front and display
. . . . . . . . . . . . . . . . . . . . . . . .
10
Access to a scene
. . . . . . . . . . . . . . . . . . .
14-15
Sound and picture
. . . . . . . . . . . . . . . . . . . . . .
16
Repeat play / karaoke
. . . . . . . . . . . . . . . . . . .
17
Sound and picture
For DVDs
Playing Dolby Digital (AC-3) 5.1 channel DVDs you can hear virtual surround sound as if comming from non-
existant rear speakers (even if you use only a stereo TV or a two-channel stereo system).
Virtual Surround Sound
96 kHz 24 bit
96 kHz 24 bit
on the player's front display
Picture soft / sharp
1 2 3 5 A B T 100 1
sharp
soft
normal
1
Start playback using PLAY button.
2
Press virtual surround button on the top left
part of the remote control:
a 1x for a natural effect (VSS1),
b 2x for a more emphasized effect (VSS2), and
c the 3
rd time, to cancel virtual Surround effect
again.
• Virtual Surround sound may not be so impressive with some
discs.
• Turn off the TV set surround sound and other surround effects
(HiFi system) when using this virtual surround system.
• For optimum effects it is recommended that the distance
between the TV set and the listening position should be about
3 or 4 times the distance between the left and the right front
speakers.
• You also can set surround sound via menu: Press the yellow
info button twice, then arrow. Set using
arrows.
5 100 1
off
natural
emphasized 2
1
For DVDs and video CDs
To have an appropriate setting for different quality video recordings.
1
Start playback using PLAY button.
2
Press the yellow info button twice;
you see the Info strip on-screen (level 2).
3
Move to " ✕ " picture using the arrow.
4
Switch the picture mode as you require in three
steps from sharp to soft using
arrows.
5
Exit the display with info button.