5 caller identification – Topcom BUTLER 5500 User Manual

Page 11

Advertising
background image

Topcom Butler 5500

ENGLISH

Topcom Butler 5500

11

Copy from SIM card

You can copy complete phonebook lists from compatible mobile phone SIM cards. The SIM phonebook is copied to the
handset you are using. Before you start copy from SIM card, please make sure you have programmed the correct
country codes ( see § “8.5 SIM COUNTRY CODE SETTINGS” )

Insert the SIM card into the slot on the base as shown below:

Note: Only 3V sim cards can be used!

Press NAMES then OPTIONS.

Scroll

to

Copy From SIM and press OK. The Copy From SIM screen is displayed.

Enter the SIM card PIN code if requested and press OK. During copying, the screen shows the name of each entry
as it is copied. When finished you see Done. If you enter the wrong PIN twice, Copy SIM Failed is displayed and
the screen returns to standby. If the handset memory becomes full during copying the screen shows Memory Full.
Not All Copied.

Press and hold Back to return to standby.

Note:If the handset memory becomes full during copying, not all the entries will be transferred. The maximum number

of entries is 200. If your handset phonebook already contains 160 entries, only the first 40 entries on the SIM card
will be copied. Your Butler 5500 checks all available directory memory spaces on your mobile SIM card. During
copying, the “handset on base” LED will flash. If you forget your PIN or if the SIM card becomes locked because
the wrong code has been entered, please check with your mobile network provider how to unlock.

Any international numbers stored on your SIM card may be prefixed by ‘+’. The ‘+’ will be automatically replaced
by the international prefix ( see § “8.5 SIM COUNTRY CODE SETTINGS” ).

You can copy the contents of several SIM cards, within the limit of 200 entries!

5 CALLER IDENTIFICATION

!! This service only works when you have a Caller ID/Clip subscription. Contact your telephone
company !!

When you receive a call, the telephone number of the caller appears on the handset display. The telephone can receive
calls in both FSK and DTMF. You can also see his or her name if it’s transmitted by the network. If the name is
programmed in the Phone Book, the name in the Phone Book is displayed!
The telephone can store 50 calls in a Call List (received and missed) that can be reviewed later. When the memory is
full, the new calls automatically replace the oldest calls in the memory. Missed calls are signalled by an icon on the
display and by the

LED in the base.

To read the received calls:

There are 3 ways to show the missed calls:

1) To consult the missed call list when display shows the missed calls amounth during standby:

Press Read and scroll to the list with the navigator keys

and

.

The missed calls that you have not consulted are marked with a “ “

*

B5500_Eur.Book Page 11 Tuesday, September 14, 2004 2:26 PM

Advertising