Topcom BUTLER 5500 - Manual (Page 15)

Topcom Butler 5500
ENGLISH
Topcom Butler 5500 15
• Press MENU then scroll to Personalise and press OK. Select Call Groups then press OK.
• Scroll to highlight the Call Group you want, Friends, Family, Work, Other and press OK.
• Scroll or to highlight the option you want from the list and press OK:
View Entries: see who’s in your call group. Scroll or .
Add Entries: add a name from the phonebook to your Group. Scroll or to select an entry then press ADD.
Remove Entries: remove names from your Group. Scroll or to select an entry then press REMOVE.
Ringtone: select a ringtone for the group. Scroll or to hear the options then press OK.
Picture: select a picture for the group. Scroll or through the list. Press VIEW to see the picture and press
USE to select the picture.
Edit Group Name: set a new name for the Group. Press CLEAR to delete the current name and enter the new
name. Press SAVE.
Clear Group: delete the group. Press YES to confirm or NO to cancel. All entries will be deleted from the group
but not the phonebook.
8 BASE SETTINGS
8.1 RINGTONE AND VOLUME
8.1.1 Ringtone
You can choose 5 different ringer melodies:
•
From the standby screen, press MENU then scroll to Base settings and press OK.
• Press OK again to enter the Base Melody menu.
• Scroll or to the melody you want. During scrolling a sample is played. Press OK to select or BACK to
return to the previous menu.
• Press and hold BACK to return to standby.
8.1.2 Ringer volume
There are five base ringer volume levels and Off.
•
From the standby screen, press MENU then scroll to Base settings and press OK.
• Scroll to Base Volume and press OK.
• The current setting is displayed. Press to increase or to decrease the volume. Press OK to confirm.
• Press and hold BACK to return to standby.
8.2 HANDSET PRIORITY
Normally, if you have more than one handset registered to your base, they all ring at the same time. However, you can
set one of them to ring before the others, so that calls can always be answered at one handset first.
•
From the standby screen, press MENU then scroll to Base settings and press OK.
• Scroll to Handset Priority and press OK. Display highlights All Handsets. Press OK to select All Handsets
to make all handsets ring together.
Or
•
Scroll to Select Handset and press OK. Scroll or to the handset you want to ring first. Press OK.
• Scroll or to select the number of rings at the handset before the other handsets start ringing. Press OK
to confirm.
8.3 LINE SETTINGS
8.3.1 Dial mode
There are two types of dialling mode:
1) DTMF/tone dialling (the most common)
2) Pulse dialling (for older installations)
• Press MENU then scroll to Base Settings and press OK. Scroll to Dial Mode and press OK.
• Press or to highlight Pulse or Tone and press OK to confirm.
B5500_Eur.Book Page 15 Tuesday, September 14, 2004 2:26 PM