TANDBERG Gatekeeper/Border Controller API D14172.01 - Manual (Page 76)

TANDBERG Gatekeeper/Border Controller API User Guide
D14172.01 page 76 of 84
Connected Call [1..900] Leg [1..2] Address: <String>
Shows the IP address and port of the call party.
Connected Call [1..900] Leg [1..2] Encryption [status = <On/Off>]
Shows the status of encryption on the call leg.
Connected Call [1..900] Leg [1..2] Encryption CheckCode: <String>
Shows the check code for the encrypted call leg. Only present if encryption status is On.
Connected Call [1..900] StartTime: <String>
Shows the time at which the call was initiated.
Connected Call [1..900] Duration: <String>
Shows the duration of the call in seconds.
Connected Call [1..900] SourceAlias: <String>
Shows the alias of the source call party.
Connected Call [1..900] SourceAddress: <String>
Shows the IP address and port of the source call party.
Connected Call [1..900] DestinationAlias: <String>
Shows the alias of the destination call party.
Connected Call [1..900] DestinationAddress: <String>
Shows the IP address and port of the destination call party.
Disconnected
Disconnected Call [1..900] SerialNumber: <String>
Shows the unique serial number of the call.
Disconnected Call [1..900] State: <Disconnected>
Shows the state of the call.
Disconnected Call [1..900] CallType: <Traversal/Direct/Routed>
Shows the type of the call.
Disconnected Call [1..900] Bandwidth: <Integer>
Shows the bandwidth in kbps for the call.
Disconnected Call [1..900] Leg [1..2] Alias [type = <IPAddress/E164/H323Id
/Email/Url/Prefix/Suffix>]
Shows the type of the call party alias.
Disconnected Call [1..900] Leg [1..2] Alias: <String>
Shows the alias of the call party.
Disconnected Call [1..900] Leg [1..2] Address: <String>
Shows the IP address and port of the call party.