Topcom Butler 3400 - Manual (Page 3)

Topcom Butler 3400/Twin/Triple/Quattro 3
Topcom Butler 3400/Twin/Triple/Quattro
ENGLIS
H
Put the handset on the base unit. The red Charge LED will lit as long as the handset is
on the base. Charge the handset for a period of 24 hours before using the handset for the
first time. To extend the battery life time, discharge the batteries completely from time to time.
As soon as the handset emits a warning tone or when the battery icon is empty, you have
to put it back on the base unit for charging.
4 Battery low indication
When the battery is empty, the handset no longer carries out operations. When a battery is
completely empty and you have put the handset on the base unit for a short period of time,
the Battery symbol will appear to be fully charged but this is actually not the case. The battery
capacity will decrease rapidly. We advise you to put the handset on the base unit for 12 hrs
so that it can be recharged completely:
Full battery Empty battery
When you are in the middle of a conversation and the battery is almost empty, the handset
will emit a warning signal. Place the handset on the base unit to charge.
5 Operation
5.1 Outgoing calls
5.1.1 Making a phone call or redialing the last number
Press the Line button . You will hear the dial tone.
Î
Enter the desired telephone
number or press the Redial key to dial out the number you last called.
Î
Press the Line
button when you want to terminate the call.
5.1.2 Call setup with dial preparation
Enter the desired telephone number. An incorrect number can be corrected by means of the
Mute
button.
Î
Press the Line button . The number will be dialled automatically.
Î
Press the Line button when you want to terminate the call.
5.1.3 Redial one of the last 3 numbers dialled
Press the Redial key .
The number you last called appears on the display. If you would like
to dial one of the last 3 numbers dialled, press the Redial key a few times until the desired
number appears on the display.
Î
Press the Line key .
Î
The number shown on the
display is dialled automatically.
Î
After finishing your call, press the Line key to hang up.
5.2 Incoming calls
When a call comes in, the handset will start to ring.
Î
Press the Line button to answer
the incoming call.
5.3 Activate/deactivate hands free function
When you are on the phone, press the Hands free key to activate the hands free function.
Press the same button to deactivate the hands free function.
When you are calling in hands free mode and you want to change the
volume, press the Volume button.
When you use the hands free function for a long time, the batteries will be
empty more quickly !