Toshiba F25Series - Manual (Page 106)

106 Learning the Basics
Powering down the computer
5.375 x 8.375 ver 2.3
❖ When starting up again, the computer returns to the state
in which you left it, and opens all the programs and files
you were using.
If you power down using the Standby command and the
battery discharges fully, your unsaved information will be lost.
Be sure to save your work often.
If you are not connected to a Windows ® network server
(domain server), power down the computer using the Standby
command as follows:
1 Click Start, Turn off computer.
The Turn off computer window appears.
Sample Turn off computer window with Stand By option
2 Click Stand By.
If you hold down the Shift key, Stand By becomes Hibernate in
the Turn off computer dialog box. To enter hibernation mode,
you must hold down the Shift key while you select Hibernate.
The computer saves the state of all open programs and files to
memory, turns off the display, and goes into a low-power
NOTE