Toshiba F25Series - Manual (Page 59)

59 Getting Started
Adding memory
5.375 x 8.375 ver 2.3
The Fn + F9 shortcut can be used to disable or enable the
TouchPad (see
“Disabling or enabling the TouchPad” on
page 299 ).
Adding memory
HINT: To purchase additional memory modules, see the
accessories information packaged with your system or visit
accessories.toshiba.com .
Your computer comes with enough memory to run most of
today’s popular applications. You may want to increase the
computer’s memory if you use complex software or process
large amounts of data.
For more information on memory options, check the
accessories information that came with your computer, or
visit
accessories.toshiba.com .
Installing a memory module
Additional memory modules can be installed in the memory
module slots on the base of the computer. You will need a
standard Phillips No. 1 screwdriver for this procedure.
Before adding external devices or memory, Toshiba
recommends setting up your software. See
“Setting up your
software” on page 47 .
To avoid damaging the computer’s screws, use a standard
Phillips No. 1 screwdriver that is in good condition.
NOTE
NOTE