When writing or rewriting, When writing or rewriting -34 – Toshiba A210 User Manual

Page 134

Advertising
background image

Operating Basics

4-34 User’s Manual

O

PE

R

A

T

ING

B

AS

IC

S

◆ Do not write while virus check software is running. Wait for it to finish, and

then disable virus detection programs including any software that checks
files automatically in the background.

◆ Do not use hard disk utilities, including those intended to enhance HDD

access speed. They may cause unstable operation and data damage.

◆ Write from the computer’s HDD to the CD/DVD. Do not try to write from

shared devices such as a LAN server or any other network device.

◆ Writing with software other than TOSHIBA Disc Creator is not recom-

mended.

When writing or rewriting

Please observe/consider the following when you write or rewrite to a CD-R/RW,
DVD-R/-R DL/-RW/-RAM or DVD+R/+R DL/+RW disc.
◆ Do not perform any of the following actions:

◆ Change users in the Windows Vista™ operating system.
◆ Operate the computer for any other function, including use of a mouse

or Touch Pad, closing/opening the LCD panel.

◆ Start a communication application such as a modem.
◆ Apply impact or vibration to the PC.
◆ Install, remove or connect external devices, including the following:

Express Card, USB devices, external display, i.LINK devices, optical
digital devices.

◆ Use the Audio/Video control button to reproduce music or voice.
◆ Open the CD-RW/DVD-ROM or DVD Super Multi (+-R DL) drive.

◆ Do not use shut down/log off and sleep/hibernation while writing or rewrit-

ing.

◆ Make sure writing or rewriting is completed before going into sleep/hiberna-

tion. Writing is completed if you can open the CD-RW/DVD-ROM or DVD
Super Multi (+-R DL) drive tray.

◆ Set the computer on a level surface and avoid places subject to vibration

such as airplanes, trains, or cars. Do not use an unstable surface such as a
stand.

◆ Keep mobile phones and other wireless communication devices away from

the computer.

◆ Always copy data from the HDD to the DVD-RAM. Do not use cut-and-

paste. The original data will be lost if there is a write error.

Advertising