Toshiba SD-P7000 - Manual (Page 18)

Connecting to optional equipment (Continued)
18
75
ANT IN
VIDEO DIGITAL AUDIO
OPTICAL
75
ANT IN
AUDIO Y P B P R (L) (R)
Connections
TV Side Panel
TV Side Panel
DTV Setup
Using Headphones
- To watch digitally broadcast programs, purchase
and connect a digital set-top box.
Connections
Connect the digital set-top box video outputs to the
COMPONENT (Y, P
B , P R ) jacks and connect the
digital set-top box audio outputs to the AUDIO
jacks.
Viewing Setup
1. Turn on the digital set-top box. (Refer to the
owner’s manual for the digital set-top box.)
2. Use the INPUT SELECT button on the remote
control to select Component.
TV Back Panel
- Plug headphones into the H/P jack as shown.
- Adjust the sound level of the headphone using the
VOLUME ( + , -) buttons. While you are listening through a
headphone(s), TV speakers will not be heard.
DTV Receiver (Set-top Box)
75
ANT IN
DVD Output Setup
TV Back Panel
Second TV or Monitor
input terminals
75
ANT IN
75
ANT IN
VIDEO AUDIO (L) (R)
TV Back Panel
Second TV or Monitor
input terminals
OR
The TV has a special signal output capability which allows you to hook up a second TV or monitor.
Connect the second TV or monitor to the TV’s DVD OUTPUT and OPTICAL DIGITAL SOUND OUT jack. ( See the
Operating Manual of the second TV or monitor for further details regarding that device’s input settings. )
Notes: • If your second TV or monitor has no optical digital audio input jack, it’s impossible to use DVD digital sound output.
• Do not look into the optical output port. Looking at the laser beam may damage your vision.
• If your external audio equipment has a digital audio input optical port, you can connect it to your TV.