Toshiba SD-P7000 - Manual (Page 19)

19
PC Setup
75
ANT IN
TV Back Panel
- After setup, be sure to select RGB-PC source on TV.
Connections
1. Set the monitor output resolution on the PC before
connecting to the TV.
2. Connect the TV to the PC with the PC cable.
3. Connect the PC audio output to the TV's PC SOUND
input.
Viewing Setup
1. Turn on the PC.
2. Use the INPUT SELECT button on the remote control
to select PC.
NOTES
a. For optimum picture quality, use standard WXGA (1280x768) computer output at a 60Hz refresh rate. Using other formats
(VGA, SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video output format, please
refer to the operating manual for the computer you are using).
b. If the message “ Out of range ” appears on the screen, adjust the PC output to a format listed in the ‘Displayable Monitor
Output Format Specifications' chart above.
c. The synchronization input form for Horizontal and Vertical frequencies is separate.
DPM (Display Power Management) mode
If the PC goes to power saving mode, the monitor automatically switches to DPM mode.
Resolution
640x480
800x600
Horizontal
Frequency(kHz)
31.47
35.00
37.50
35.16
37.88
48.08
46.88
60
66.67
75
56.25
60
72.19
75
48.36
56.48
60.02
47.78
60
70
75
60
Vertical
Frequency(Hz)
1024x768
1280x768
Monitor Display Specifications
Connections