Technical specifications active module – Tannoy SUBWOOFERS User Manual
Page 26
26
TECHNICAL SPECIFICATIONS ACTIVE MODULE
Frequency Response:
-3 dB 31 Hz -150 Hz (-10 dB @ 21 Hz)
Power Rating:
110 Watts rms
Maximum SPL (2) @ 1 meter:
110 dB (Peak)
Driver Complement:
1 x 10” (254 mm)
LF Cutoff (-3 dB):
31 Hz, 6 order tuning, vented box
Inputs:
2 x XLR balanced
Outputs:
2 x XLR balanced
Protection Limiter:
Threshold at onset of clipping
Input Level:
Continuously variable input gain control
Low Pass Filter:
Continuously variable 40 Hz - 150 Hz, 24 dB/Octave
All Pass:
31 Hz - 300 Hz +3 dB
High Pass Filter:
Fixed at 80 Hz, 12 dB / Octave
High Pass output:
L/R, unity gain XLR balanced
High Pass output Bandwidth:
80 Hz - 150 kHz -3 dB
Amplifier type:
Mosfet outputs
AC Power Requirement:
110/120 VAC 50/60 Hz or 220/240 VAC 50/60 Hz
Power Consumption:
16 Watts at idle
150 Watts at rated power
Power Indicator:
Front mounted green LED in active mode, "when signal is present or on initial
power up". Green LED turns to red if signal is not present for more than two
minutes indicating stand-by mode. The sub turns "auto on" when signal is
re-introduced.
th