TC Electronic NM-1 Nova Modulator - Manual (Page 31)

No presets are deleted when limiting the preset
range. The “hidden” presets can always be
accessed again by increasing the preset range.
Store
First of all please note that no matter if you are in
Preset mode, Bank mode or Manual mode, the display
always shows the last recalled preset.
To Store a Preset in Preset mode
• Press and hold PRESET until the ON/OFF LEDs
flash three times (approx 4 seconds).
• The current settings are now stored in the current
location.
To store a Preset in Bank mode
As explained on the previous page, the Bank Preset
mode holds two presets per bank. The two presets can
be stored individually.
STORE
31
Bank # 2 is selected and the preset
represented by the PRESET button LED is
active.
Press and hold PRESET (approx 4 seconds)
to store the current settings in the same
location.
Bank # 2 is selected and the preset
represented by the MANUAL button LED is
active.
Press and hold PRESET (approx 4 seconds) to
store the current settings in the same location.
Example: