TC Electronic NM-1 Nova Modulator - Manual (Page 5)

SETUP EXAMPLE: MONO
5
This is a standard mono setup consisting only of
your guitar, your amp and the NOVA Modulator.
• Connect your guitar to the left input (L) of the
NOVA Modulator.
• Connect the left output (L) of the NOVA
Modulator to the input of your amp.
We recommend placing the NOVA Modulator
pedal in the signal path after distortion/overdrive
pedals.
For best signal to noise ratio, calibrate
the pedal according to the level of the
input signal. For further information, refer
to this manual’s “Calibration” section.