Toshiba 15VL33 - Manual (Page 23)

22
To browse in the menus, you may use the
“PR “/“PR “ buttons and Vol+ or Vol- buttons
to select the type of adjustment you wish to make. Once you make your selection, you may set
the desired adjustment value using the
“PR “/“PR “ buttons.
BRIGHTNESS
After entering the Brightness Menu using the
“VOL ”/“VOL “ buttons, you may set the
brightness value of the monitor to the desired level by using the
“PR “/“PR “ buttons.
CONTRAST
After entering the Contrast Menu using the
“VOL ”/“VOL “ buttons, you may set the
contrast value of the monitor to the desired level by using the
“PR “/“PR “ buttons.
POSITION
After entering the Position Menu using the
“VOL ”/“VOL “ buttons, you may set the
geometrical adjustment value of the monitor to the desired level by using the
“PR “/“PR “
buttons.
H-POSITION : Horizontal position adjustment
V-POSITION : Vertical position adjustment
IMAGE
After entering the Image Menu using the
“VOL ”/“VOL “ buttons, you may set the phase
adjustment value of the monitor to the desired level by using the
“PR “/“PR “ buttons
PHASE : ADC sampling phase adjustment
CLOCK : ADC clock count Per line
3
4
7
AV
5
8
0
6
9
-/--
OK
TV/TX
MENU
PP
16:9
HOLD
SUB
UPDATE
MIX
TV/PC
‹
ETC
INTRODUCTION
Because your 15”LCD-TV equipment is provided with VGA inputs, it may be used as a PC
monitor as well. (Pug&Play)
Entering the PC Mode
To enter the I.CD-TV in to the monitor (PC) mode, the “MIX(TV-
PC)” button on your remote control is used. Each time the
“MIX(TV/PC)” button is presed, operation changes from the PC
mode, press the “MIX” button again. In addition, you may relurn to
the TV mode by selecting the “TV SELECTION” option from the
monitor menu alternatively.
Note 1: When the system is in the monitor mode, the sound from
the TV channel selected may be heard from the speakers. When you
enter this mode, the sound control buttons on the remote control.
(
“ V O L ” / “ V O L “ M U T E ) b e c o m e f u n c t i o n a l
Note 2: When the system is in the monitor mode, the STANDBY
button is operational. Upon exit from STANDBY, the system starts
up in the TV mode again.
PC Mode Menu Structure
After chaning to the PC mode, you
may acces the monitor menus by
pressing the “MENU” button on
the front panel of the system