Toshiba 15VL33 - Manual (Page 8)

Using the TV
Turning on for the first time and Tuning
TV controls
Stand-By mode
7
Please Note: If you will not use your TV for
a long time, do not leave it on Stand-By mode,
instead switch it off from the power button
on the front panel of the TV set.
When your TV is working on, press
the red “STAND-BY” button on the
right upper corner of your remote
control to switch off and the Stand-
By indicator (Led) will be brighter.
To turn on your TV again, press one
off the numaric buttons, Program up
or Program down.
You can also select a program by
pressing in the Yellow button to
see the Program Table.
PROGRAM TABLE
05.
06.
07.
08.
09. 10.
11.
12.
13.
14. 00. ----
01.
02. BBC
03.
04.
SKIP MOVE DELETE NAME
Programme selection
Press the Program up or Program
down buttons on the TV or remote
control or press a Numeric button
to select a programme.
To select a programme whose
number is greater than 9 using the
numeric buttons, press the -/--
button first and then press the two
Numeric buttons. For example, to
-/-- select programme 12, press the
button followed by and then
1 2 .
1
-/--
1
2
Mute
To mute the sound press the Mute
button on the remote control. A
loudspeaker symbol will appear on
the screen.
Use the Program up and Program
down buttons to scroll through the
programme numbers. When you
find the program number you want
press theOK button again.
Press the TV/TX button to close the
Program Table.
Volume
Press the Volume + or Volume -
button on the TV or the Vol or
Vol
button on the remote control.
A sound level bar will appear on the
screen.
OK
TV/TX