Call, Cont – TANDBERG 6000MXP User Manual
Page 179
179
TANDBERG 3000
MXP
&
6000
MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2
–
see
XACLI – Special commands – xpreferences
If status =
On
the following will be included:
Type:
DES / AES-128
RSVP*:
On / Off
DynamicRate*:
TotalPackets*:
PacketLoss*:
Jitter*:
PacketsDropped*:
Appears for incoming calls only
Data
(status =
Active / Inactive
):
If status =
Inactive
the following will be included:
<Nothing>
If status =
Active
the following will be included:
Type:
LSD/MLP
Protocol:
FECC
Rate:
RemoteIPAddress*:
LocalIPAddress*:
Encryption*
(status =
On / Off
)
If status =
Off
the following will be included:
<Nothing>
If status =
On
the following will be included:
Type:
DES / AES-128
RSVP*:
On / Off
DynamicRate*:
TotalPackets*:
PacketLoss*:
Jitter*:
PacketsDropped*:
Appears for incoming calls only
Call
cont...