Transcend Information StoreJetTM 25P - Manual (Page 21)

19
Figure 19: “Erase Disk” confirmation window
10. Click the “Close” button to finish and exit.
Linux
®
1. Plug the StoreJet 25 into an available USB port on your Linux computer.
2. Unplug all other USB storage devices from your computer. This is to prevent accidental
format of a different USB drive.
3. Type fdisk /dev/sda (replace /dev/sda with your actual USB device)
4. Press p
5. Press n
6. Press w
7. Type mkfs.ext3 /dev/sda1
8. Go to /etc/fstab and add: /dev/sda1 /mnt/usbdrive auto user,noauto 0 0
9. Type mkdir /mnt/usbdrive
10. Type mount /mnt/usbdrive