Transcend Information StoreJetTM 25P - Manual (Page 7)

5
•
Please use the Mini USB to USB A-Type cable that came with the StoreJet 25 to
connect it to a computer, and always ensure that the cable you are using is in good
condition. NEVER use a cable that is frayed or damaged.
•
Ensure nothing is resting on the USB cable and that the cable is not located where it can
be tripped over or stepped on.
•
If you have connected all ends of the USB cable and still have power-related problems
while reading / writing data, we recommend that you purchase a Transcend USB Power
Adapter (TS-PA2A) to provide the power necessary to operate the StoreJet 25.
Reminders
Always follow the procedures in the “Disconnecting from a Computer” section to remove the
StoreJet from your computer.
The spare USB connector can provide additional power for
the StoreJet 25 when needed